Low Sulfur Petroleum Coke is the finsihed product of Petro coke after passing through the calcined. It is widely used in steel smelting.
Calcined Petroleum Coke
Calcined petroleum coke (CPC) is created from green petroleum coke (GPC), a by-product of refining crude oil. While CPC can be created using a number of processes -- including rotary kiln, hearth and vertical shaft technologies -- the high-temperature conversion from green coke to calcined coke alters the material in key three ways: Drying; Release of residual hydrocarbons; Densification
This is accomplished as the coke is heated from ambient temperature to a finishing temperature of about 1,350°C. Although initial start-up of the process uses an external fuel such as natural gas or fuel oil, the vast majority of heat required to sustain the process after start-up comes from the in-situ combustion of the residual hydrocarbons inherent in the coke, and only oxygen is needed to maintain that combustion.
CPC is an essential ingredient in the production of aluminum. In fact, every ton of aluminum needs approximately 0.4 tons of CPC, making Rongxing Group a critical "carbon link" between the refineries and the aluminum industry. CPC also is in great demand for the production of titanium dioxide (TiO2).
【Specification of Calcined Petroleum Poke 】
Item Data
Fixed carbon >98%
Ash <0.43%
V.M <0.7%
Sulfur <0.70%
Resistivity 450-550Ω
Nitrogen Content <9200ppm
Real Densisity 2.08-2.16g/cm3
Raw Material Pet Coke
Shape Granular and Powder
Granularity 0-1mm,1-3mm,1-4mm,1-5mm,3-8mm,5-10mm
Application Additive Carbon
Packing Ton Bag （Mt）
[email protected]
Low Sulfur Petroleum Coke is the finsihed product of Petro coke after passing through the calcined. It is widely used in steel smelting.
[email protected]
Calcined Petroleum Coke Introduction